Back up my Aldebaran robot user data¶

1/5 - Making the Aldebaran robot ready for backup¶

Step	Action
	Make sure your robot is in version 2.3 or higher. For further details, see: Upgrading my NAO.
	Check the battery level. Important: make sure the robot battery is fully charged: a power shortage during backup could create a corrupted and unusable file. Tips: if your battery has a limited autonomy, you should leave the charger plugged during the upgrade. However it could be wise to order a new battery.
	Make sure you have installed Choregraphe suite. For further details, see: Choregraphe suite - Installation Guide.
	Launch Memory Backup.

Step	Action
	Select Back up .... Note The applications installed on your robot are managed by the Aldebaran Community website and will not be backed up.
	Click the Next button.

Step	Action
	Select a Aldebaran robot in the list, or type his IP address. Then click the Next button.
	Enter the password of the Aldebaran robot.
	Click the Connect button.
	Click the Next button.

Step	Action
	Use the Browse button to select the destination path of the backup file.
	Click the Next button.

Step	Action
	Read it carefully and then click the Backup button. Note You will not be able to pursue if the robot is not plugged.
	Once the backup is done, click the Finish button.