Idle

NAOqi Motion - Overview | API

What it does

These API are dedicated to define ALMotion behavior when the robot is idle, that is, when no user command is sent.

How it works

Idle control modes

There are three idle control modes:

  • No idle control: in this mode, when no user command is sent to the robot, it does not move.
  • Idle posture control: in this mode, the robot automatically comes back to a reference posture, then stays at that posture until a user command is sent.
  • Breathing control: in this mode, the robot plays a breathing animation in loop.

Body chain idle control

The idle behavior of the robot is defined body chain per body chain.

The idle control of any body chain can be activated or deactivated at any moment, with ALMotionProxy::setIdlePostureEnabled() and ALMotionProxy::setBreathEnabled(). The last call to either of these functions defines a body chain idle control mode.

Any other user command overrides an idle task.

Transitions to and from idle task are automatic and smooth.

Breath configuration

Breathing animation can be activated on the following chains: “Body”, “Legs”, “Arms”, “LArm”, “RArm” and “Head”. The animation only works when the robot is standing.

The breath task can be configured by setting two parameters:

  • ‘Bpm’: The breathing frequency, in beats per minute, between 5 and 30.
  • ‘Amplitude’: The animation amplitude, unit free value between 0 and 1. 0 corresponds to a minimal animation, where all joints move of at most 5 degrees.

The default breathing configuration is: [['Bpm', 12], ['Amplitude', 0.5]]

Warning

To avoid unstable animations, not all combinations of ‘Bpm’ and ‘Amplitude’ are allowed on the robot. At minimum frequency, all amplitudes are allowed, and at maximum frequency, only minimum amplitude is possible. In-between, a linear interpolation is used to compute the maximum amplitude. If needed, user input amplitude is clipped to satisfy the constraints.

../../_images/motion_breath_maxAmplitude.png

Getting started

This example shows how to start an idle task on a robot, in breathing mode, and how to change the parameters of the breathing dynamically.

almotion_breath.py

# -*- encoding: UTF-8 -*-

'''Motion: Breath'''

import math
import time
import argparse
from naoqi import ALProxy

def main(robotIP, PORT=9559):
    ''' Use case of breath API
    '''

    motionProxy  = ALProxy("ALMotion", robotIP, PORT)
    postureProxy = ALProxy("ALRobotPosture", robotIP, PORT)

    # Wake up robot
    motionProxy.wakeUp()

    # Send robot to Stand Init
    postureProxy.goToPosture("StandInit", 0.5)

    # Start breathing
    motionProxy.setBreathEnabled('Body', True)

    # Get default breath config
    print 'Current breath config: ' + str(motionProxy.getBreathConfig())

    # Wait for 10 seconds, and let the robot play the breathing animation
    time.sleep(10)

    # Change breathing configuration to a faster one
    print 'Breath faster'
    motionProxy.setBreathConfig([['Bpm', 30], ['Amplitude', 0.0]])

    # Let the robot play the new animation
    time.sleep(10)

    # Stop breathing
    motionProxy.setBreathEnabled('Body', False)

    # Go to rest position
    print 'rest'
    motionProxy.rest()


if __name__ == "__main__":
    parser = argparse.ArgumentParser()
    parser.add_argument("--ip", type=str, default="127.0.0.1",
                        help="Robot ip address")
    parser.add_argument("--port", type=int, default=9559,
                        help="Robot port number")

    args = parser.parse_args()
    main(args.ip, args.port)
« previous | up | next »