HALInterface is responsible for reading and writing values into the Hardware Abstraction Layer (HAL) of the robot. More...

#include <alnaosim.h>

Public Member Functions
	HALInterface (const Model *model, int NAOqiId=9559)
	creates a HALInterface given a valid model. More...

	~HALInterface ()
	destructor. More...

float	fetchAngleActuatorValue (const AngleActuator *angleActuator)
	returns the last command value (in radians) of the given angleActuator. More...

float	fetchCoupledActuatorValue (const CoupledActuator *coupledActuator)
	returns the last command value (between 0 and 1, no unit) of the given coupledActuator. More...

float	fetchTorqueActuatorValue (const TorqueActuator *torqueActuator)
	returns the last command value (in Newton per meter) of the given torqueActuator. More...

float	fetchAngleSpeedActuatorValue (const AngleSpeedActuator *angleSpeedActuator)
	returns the last command value (in radians per second) of the given angleSpeedActuator. More...

float	fetchWheelTorqueActuatorValue (const WheelTorqueActuator *wheelTorqueActuator)
	returns the last command value (in Newton per meter) of the given wheelTorqueActuator. More...

float	fetchWheelVelocityActuatorValue (const WheelVelocityActuator *wheelVelocityActuator)
	returns the last command value (in radians per second) of the given wheelVelocityActuator. More...

float	fetchLEDActuatorValue (const LEDActuator *ledActuator)
	returns the last command value (between 0 and 1) of the given ledActuator. More...

float	fetchAngleActuatorStiffness (const AngleActuator *angleActuator)
	returns the last stiffness value (between 0 and 1, no unit) of the given angleActuator. More...

float	fetchCoupledActuatorStiffness (const CoupledActuator *coupledActuator)
	returns the last stiffness value (between 0 and 1, no unit) of the given coupledActuator. More...

float	fetchTorqueActuatorStiffness (const TorqueActuator *torqueActuator)
	returns the last stiffness value (between 0 and 1, no unit) of the given torqueActuator. More...

float	fetchAngleSpeedActuatorStiffness (const AngleSpeedActuator *angleSpeedActuator)
	returns the last stiffness value (between 0 and 1, no unit) of the given angleSpeedActuator. More...

float	fetchWheelTorqueActuatorStiffness (const WheelTorqueActuator *wheelTorqueActuator)
	returns the last stiffness value (between 0 and 1, no unit) of the given wheelTorqueActuator. More...

float	fetchWheelVelocityActuatorStiffness (const WheelVelocityActuator *wheelVelocityActuator)
	returns the last stiffness value (between 0 and 1, no unit) of the given wheelVelocityActuator. More...

bool	sendAngleSensorValue (const AngleSensor *angleSensor, float value)
	sends value (in radians) to the given angleSensor. More...

bool	sendCoupledSensorValue (const CoupledSensor *coupledSensor, float value)
	sends value (between 0 and 1, no unit) to the given coupledSensor. More...

bool	sendTorqueSensorValue (const TorqueSensor *torqueSensor, float value)
	sends value in Newton per meter to the given torqueSensor. More...

bool	sendAngleSpeedSensorValue (const AngleSpeedSensor *angleSpeedSensor, float value)
	sends value in radians per second to the given angleSpeedSensor. More...

bool	sendWheelVelocitySensorValue (const WheelVelocitySensor *wheelVelocitySensor, float value)
	sends value in radians per second to the given wheelVelocitySensor. More...

bool	sendCameraSensorValue (const CameraSensor cameraSensor, const unsigned char img)
	sends the content of the buffer img to the given cameraSensor More...

bool	sendCameraSensorValue (const CameraSensor cameraSensor, const unsigned char img, CameraResolution camResolution, CameraColorSpace camColorSpace)
	sends the content of the buffer img to the given cameraSensor More...

bool	sendCameraDepthSensorValue (const CameraDepthSensor cameraDepthSensor, const float buffer)
	sends the content of the buffer depth to the given cameraDepthSensor. More...

bool	sendCameraDepthSensorValue (const CameraDepthSensor cameraDepthSensor, const float buffer, CameraResolution camResolution, CameraColorSpace camColorSpace)
	sends the content of the buffer depth to the given cameraDepthSensor. More...

bool	sendFSRSensorValue (const FSRSensor *fsrSensor, float value)
	sends value (in kilograms) to the given fsrSensor. More...

bool	sendBumperSensorValue (const BumperSensor *bumperSensor, float value)
	sends value (between 0 and 1, no unit) to the given bumperSensor. More...

bool	sendTactileSensorValue (const TactileSensor *tactileSensor, float value)
	sends value (between 0 and 1, no unit) to the given tactileSensor. More...

bool	sendDepthInfraredSensorValue (const DepthInfraredSensor *depthInfraredSensor, float value)
	sends value (in meters) to the given DepthInfraredSensor. More...

bool	sendSingleDepthSensorValue (const SingleDepthSensor *singleDepthSensor, float value)
	sends value (in meters) to the given SingleDepthSensor. More...

bool	sendInertialSensorValues (const InertialSensor *inertialSensor, const std::vector< float > &values)
	sends values (see remarks) to the given inertialSensor. More...

bool	sendSonarSensorValues (const SonarSensor *sonarSensor, const std::vector< float > &values)
	sends values in meters to the given sonarSensor (see remarks). More...

bool	sendSonarSensorValue (const SonarSensor *sonarSensor, float value)
	sends value in meters to the given sonarSensor (see remarks). More...

bool	sendArrayDepthSensorValues (const ArrayDepthSensor *arrayDepthSensor, const std::vector< float > &values)
	sends values in meters to the given arrayDepthSensor More...

void	cameraBufferSize (const CameraSensor camera, int cameraBufferSize, int width, int height)
	gives the buffer size, width and height of the given camera More...

int	cameraBufferSize (const CameraSensor *camera)
	returns the buffer size of the camera. More...

void	cameraDepthBufferSize (const CameraDepthSensor camera, int cameraBufferSize, int width, int height)
	gives the buffer size, width and height of the given depth camera. More...

CameraResolution	cameraResolution (const BaseCamera *camera) const
	gives the current resolution of the given CameraSensor More...

CameraColorSpace	cameraColorSpace (const BaseCamera *camera) const
	gives the current color space of the given CameraSensor More...

Public Attributes
class HALInterfaceImpl *	a_impl
	Private implementation. More...

Detailed Description

HALInterface is responsible for reading and writing values into the Hardware Abstraction Layer (HAL) of the robot.

Remarks: Values from the HAL are read by NAOqi, so changing these values allows you to simulate stimuli from the environment to NAOqi.; This lib uses NAOqi logging system (qi::log). The log system needs to be initialized in the main of your application, see libqi documentation. NAOqi launches this logging system, so you will see log messages if you launch a NAOqi while using this lib.

Definition at line 61 of file alnaosim.h.

Constructor & Destructor Documentation

Sim::HALInterface::HALInterface	(	const Model *	model,
		int	NAOqiId = `9559`
	)

creates a HALInterface given a valid model.

Sim::HALInterface::~HALInterface ( )

destructor.

Member Function Documentation

void Sim::HALInterface::cameraBufferSize	(	const CameraSensor *	camera,
		int *	cameraBufferSize,
		int *	width,
		int *	height
	)

gives the buffer size, width and height of the given camera

Remarks: The dimensions are expressed in pixels.

int Sim::HALInterface::cameraBufferSize ( const CameraSensor * camera )

returns the buffer size of the camera.

Remarks: The value returned here is equal to width * height * 3. The dimensions are expressed in pixels. 3 corresponds to the 3 colors (RGB)

Deprecated:: Since 1.18, use cameraBufferSize(camera, bufferSize, width, height) instead.

CameraColorSpace Sim::HALInterface::cameraColorSpace ( const BaseCamera * camera ) const

gives the current color space of the given CameraSensor

void Sim::HALInterface::cameraDepthBufferSize	(	const CameraDepthSensor *	camera,
		int *	cameraBufferSize,
		int *	width,
		int *	height
	)

gives the buffer size, width and height of the given depth camera.

Remarks: The dimensions are expressed in pixels.

CameraResolution Sim::HALInterface::cameraResolution ( const BaseCamera * camera ) const

gives the current resolution of the given CameraSensor

float Sim::HALInterface::fetchAngleActuatorStiffness ( const AngleActuator * angleActuator )

returns the last stiffness value (between 0 and 1, no unit) of the given angleActuator.

Remarks: As long as the hal executable has not been launch, this will return NaN. This allows you to know when the simulation has started and gives meaningful position at start-up.

float Sim::HALInterface::fetchAngleActuatorValue ( const AngleActuator * angleActuator )

returns the last command value (in radians) of the given angleActuator.

Remarks: As long as the hal executable has not been launch, this will return NaN. This allows you to know when the simulation has started and gives meaningful position at start-up.

float Sim::HALInterface::fetchAngleSpeedActuatorStiffness ( const AngleSpeedActuator * angleSpeedActuator )

returns the last stiffness value (between 0 and 1, no unit) of the given angleSpeedActuator.

Remarks: As long as the hal executable has not been launch, this will return NaN. This allows you to know when the simulation has started and gives meaningful position at start-up.

float Sim::HALInterface::fetchAngleSpeedActuatorValue ( const AngleSpeedActuator * angleSpeedActuator )

returns the last command value (in radians per second) of the given angleSpeedActuator.

Remarks: As long as the hal executable has not been launch, this will return NaN. This allows you to know when the simulation has started and gives meaningful position at start-up.

float Sim::HALInterface::fetchCoupledActuatorStiffness ( const CoupledActuator * coupledActuator )

returns the last stiffness value (between 0 and 1, no unit) of the given coupledActuator.

Remarks: As long as the hal executable has not been launch, this will return NaN. This allows you to know when the simulation has started and gives meaningful position at start-up.

float Sim::HALInterface::fetchCoupledActuatorValue ( const CoupledActuator * coupledActuator )

returns the last command value (between 0 and 1, no unit) of the given coupledActuator.

Remarks: As long as the hal executable has not been launch, this will return NaN. This allows you to know when the simulation has started and gives meaningful position at start-up.

float Sim::HALInterface::fetchLEDActuatorValue ( const LEDActuator * ledActuator )

returns the last command value (between 0 and 1) of the given ledActuator.

Remarks: As long as the hal executable has not been launch, this will return Nan.

float Sim::HALInterface::fetchTorqueActuatorStiffness ( const TorqueActuator * torqueActuator )

returns the last stiffness value (between 0 and 1, no unit) of the given torqueActuator.

Remarks: As long as the hal executable has not been launch, this will return NaN. This allows you to know when the simulation has started and gives meaningful position at start-up.

float Sim::HALInterface::fetchTorqueActuatorValue ( const TorqueActuator * torqueActuator )

returns the last command value (in Newton per meter) of the given torqueActuator.

Remarks: As long as the hal executable has not been launch, this will return NaN. This allows you to know when the simulation has started and gives meaningful position at start-up.

float Sim::HALInterface::fetchWheelTorqueActuatorStiffness ( const WheelTorqueActuator * wheelTorqueActuator )

returns the last stiffness value (between 0 and 1, no unit) of the given wheelTorqueActuator.

Remarks: As long as the hal executable has not been launch, this will return NaN. This allows you to know when the simulation has started and gives meaningful position at start-up.

float Sim::HALInterface::fetchWheelTorqueActuatorValue ( const WheelTorqueActuator * wheelTorqueActuator )

returns the last command value (in Newton per meter) of the given wheelTorqueActuator.

Remarks: As long as the hal executable has not been launch, this will return NaN. This allows you to know when the simulation has started and gives meaningful position at start-up.

float Sim::HALInterface::fetchWheelVelocityActuatorStiffness ( const WheelVelocityActuator * wheelVelocityActuator )

returns the last stiffness value (between 0 and 1, no unit) of the given wheelVelocityActuator.

Remarks: As long as the hal executable has not been launch, this will return NaN. This allows you to know when the simulation has started and gives meaningful position at start-up.

float Sim::HALInterface::fetchWheelVelocityActuatorValue ( const WheelVelocityActuator * wheelVelocityActuator )

returns the last command value (in radians per second) of the given wheelVelocityActuator.

Remarks: As long as the hal executable has not been launch, this will return NaN. This allows you to know when the simulation has started and gives meaningful position at start-up.

bool Sim::HALInterface::sendAngleSensorValue	(	const AngleSensor *	angleSensor,
		float	value
	)

sends value (in radians) to the given angleSensor.

bool Sim::HALInterface::sendAngleSpeedSensorValue	(	const AngleSpeedSensor *	angleSpeedSensor,
		float	value
	)

sends value in radians per second to the given angleSpeedSensor.

bool Sim::HALInterface::sendArrayDepthSensorValues	(	const ArrayDepthSensor *	arrayDepthSensor,
		const std::vector< float > &	values
	)

sends values in meters to the given arrayDepthSensor

bool Sim::HALInterface::sendBumperSensorValue	(	const BumperSensor *	bumperSensor,
		float	value
	)

sends value (between 0 and 1, no unit) to the given bumperSensor.

bool Sim::HALInterface::sendCameraDepthSensorValue	(	const CameraDepthSensor *	cameraDepthSensor,
		const float *	buffer
	)

sends the content of the buffer depth to the given cameraDepthSensor.

Remarks: The depth map contained in buffer has a size given by cameraDepthSensorBufferSize. Each value defines in float the depth of pixel in meters.

Deprecated:: since 1.18, use sendDepthCameraSensorValue with CameraResolution and CameraColorSpace instead.

bool Sim::HALInterface::sendCameraDepthSensorValue	(	const CameraDepthSensor *	cameraDepthSensor,
		const float *	buffer,
		CameraResolution	camResolution,
		CameraColorSpace	camColorSpace
	)

sends the content of the buffer depth to the given cameraDepthSensor.

camResolution is the resolution of the buffer sent
camColorSpace is the color space of the buffer sent

bool Sim::HALInterface::sendCameraSensorValue	(	const CameraSensor *	cameraSensor,
		const unsigned char *	img
	)

sends the content of the buffer img to the given cameraSensor

Remarks: The image contained in img can be of different sizes: 160 * 120, 320 * 240 or 640 * 480 and is defined in RGB.

Deprecated:: since 1.18, use sendCameraSensorValue with CameraResolution and CameraColorSpace instead.

bool Sim::HALInterface::sendCameraSensorValue	(	const CameraSensor *	cameraSensor,
		const unsigned char *	img,
		CameraResolution	camResolution,
		CameraColorSpace	camColorSpace
	)

sends the content of the buffer img to the given cameraSensor

camResolution is the resolution of the buffer sent
camColorSpace is the color space of the buffer sent

bool Sim::HALInterface::sendCoupledSensorValue	(	const CoupledSensor *	coupledSensor,
		float	value
	)

sends value (between 0 and 1, no unit) to the given coupledSensor.

bool Sim::HALInterface::sendDepthInfraredSensorValue	(	const DepthInfraredSensor *	depthInfraredSensor,
		float	value
	)

sends value (in meters) to the given DepthInfraredSensor.

Deprecated:: use sendSingleDepthSensor instead.

bool Sim::HALInterface::sendFSRSensorValue	(	const FSRSensor *	fsrSensor,
		float	value
	)

sends value (in kilograms) to the given fsrSensor.

bool Sim::HALInterface::sendInertialSensorValues	(	const InertialSensor *	inertialSensor,
		const std::vector< float > &	values
	)

sends values (see remarks) to the given inertialSensor.

Remarks: The values that you have to provide to this method are in the following order: orientation around x-axis and y-axis (in radians), accelerations along x-axis x, y-axis and z-axis (in meter per second squared), and rotational speed around x-axis and y-axis (in radian per second). For more details about the position and orientation of the axis, see the sensors Section of the Hardware documentation.

bool Sim::HALInterface::sendSingleDepthSensorValue	(	const SingleDepthSensor *	singleDepthSensor,
		float	value
	)

sends value (in meters) to the given SingleDepthSensor.

bool Sim::HALInterface::sendSonarSensorValue	(	const SonarSensor *	sonarSensor,
		float	value
	)

sends value in meters to the given sonarSensor (see remarks).

Remarks: if you use this method on a SonarSensor value that has a buffer size of 1, the space left in the array will be filled with 0s.

bool Sim::HALInterface::sendSonarSensorValues	(	const SonarSensor *	sonarSensor,
		const std::vector< float > &	values
	)

sends values in meters to the given sonarSensor (see remarks).

Remarks: 10 values can be associated to a SonarSensor if it has a buffer size of 10 floats. These are the echoes received by the sonar, from the pulse signal sent by the emitter, which consists in a cone of nearly 80°. Currently only the first echo is taken into account by NAOqi, so you can fill in only the first value. You should not use this method on a sonar that has a buffer size of 1 float, but if you do, only the first value will be taken into account. In 1.12, concerning NAO the emitting sonars (1 and 3) were detected as sensors in the model, this is not the case anymore, they are not taken into account.

bool Sim::HALInterface::sendTactileSensorValue	(	const TactileSensor *	tactileSensor,
		float	value
	)

sends value (between 0 and 1, no unit) to the given tactileSensor.

bool Sim::HALInterface::sendTorqueSensorValue	(	const TorqueSensor *	torqueSensor,
		float	value
	)

sends value in Newton per meter to the given torqueSensor.

bool Sim::HALInterface::sendWheelVelocitySensorValue	(	const WheelVelocitySensor *	wheelVelocitySensor,
		float	value
	)

sends value in radians per second to the given wheelVelocitySensor.

Member Data Documentation

class HALInterfaceImpl* Sim::HALInterface::a_impl

Private implementation.

Definition at line 290 of file alnaosim.h.

The documentation for this class was generated from the following file:

/home/opennao/work/release-2.5/simulation/simulator-sdk/alnaosim/alnaosim/alnaosim.h

Public Member Functions

Public Attributes

Detailed Description

Constructor & Destructor Documentation

Member Function Documentation

Member Data Documentation