Charging the battery

Manual procedure

To charge Pepper‘s battery:

Step	Action
	Plug the charger to the mains.
	Move Pepper close enough. If you have to move Pepper while off, see: Moving Pepper while off.
	Lift the power hatch. Note: for safety reasons, as soon as the power hatch is opened, Pepper cannot move around.
	Plug the charger cable: Put the plug into the socket and turn gently clockwise until the check valve snaps.
	Follow the charging progress. When Pepper is fully charged, the charger LED becomes green and the Status LEDs are blinking green. For further details, see: Battery - notifications.
	When Pepper is charged enough: Disconnect the charger cable from the power hatch. Disconnect the charger from the mains. Make sure you close the power hatch, or Pepper will not be able to move around.

How do I know it is time to charge the battery again

Notifications warn you that the battery needs to be recharged.

For further details, see: Battery - notifications.

Automatic procedure

If you have a Charging station installed and configured, Pepper is able to find it and to go on it when necessary.

Configuration

To configure the automatic usage of the Charging Station see: charging_settings_pep.

Precautions during use

While Pepper is on his way

Warning

• Do not push Pepper yourself on the Charging station, or proceed with extreme caution.

Warning

• For safety reasons, do not disturb Pepper while he is getting on or off his Charging station.

  In particular:

  • make sure the Charging station is not moved when Pepper goes on it,
  • do not stand in Pepper‘s way when he goes off it.

While Pepper is on the Charging station

Note

When Pepper is on his Charging station, only Activities explicitely authorized on Charging Station can run.

Troubleshooting

Charging seems longer than usual, why?

• If the battery is already hot, for example because Pepper has danced for a long time, the charging process may wait for battery cooling before proceeding.