SoftBank Robotics documentation What's new in NAOqi 2.5?

Move and Walk

<< return to Python examples

This section contains several python example on walk, both for standard walk and for customized walk.

Simple walk

These examples show how to use Aldebaran normal walk.

Walk

Make NAO walk backwards, forwards, and turn.

almotion_move.py

#! /usr/bin/env python
# -*- encoding: UTF-8 -*-

"""Example: Walk - Small example to make Nao walk"""

import qi
import argparse
import sys
import motion
import time
import almath


def userArmsCartesian(motion_service):
    effector   = ["LArm", "RArm"]
    frame      = motion.FRAME_TORSO
    useSensorValues = False

    # just control position
    axisMask   = [motion.AXIS_MASK_VEL, motion.AXIS_MASK_VEL]

    # LArm path
    pathLArm = []
    initTf   = almath.Transform(motion_service.getTransform("LArm", frame, useSensorValues))
    targetTf = almath.Transform(motion_service.getTransform("LArm", frame, useSensorValues))
    targetTf.r1_c4 += 0.04 # x
    targetTf.r2_c4 -= 0.10 # y
    targetTf.r3_c4 += 0.10 # z
    pathLArm.append(list(targetTf.toVector()))
    pathLArm.append(list(initTf.toVector()))
    pathLArm.append(list(targetTf.toVector()))
    pathLArm.append(list(initTf.toVector()))

    # RArm path
    pathRArm = []
    initTf   = almath.Transform(motion_service.getTransform("RArm", frame, useSensorValues))
    targetTf = almath.Transform(motion_service.getTransform("RArm", frame, useSensorValues))
    targetTf.r1_c4 += 0.04 # x
    targetTf.r2_c4 += 0.10 # y
    targetTf.r3_c4 += 0.10 # z
    pathRArm.append(list(targetTf.toVector()))
    pathRArm.append(list(initTf.toVector()))
    pathRArm.append(list(targetTf.toVector()))
    pathRArm.append(list(initTf.toVector()))

    pathList = []
    pathList.append(pathLArm)
    pathList.append(pathRArm)

    # Go to the target and back again
    timesList = [[1.0, 2.0, 3.0, 4.0],
                 [1.0, 2.0, 3.0, 4.0]] # seconds

    motion_service.transformInterpolations(effector, frame, pathList,
                                       axisMask, timesList)


def userArmArticular(motion_service):
    # Arms motion from user have always the priority than walk arms motion
    JointNames = ["LShoulderPitch", "LShoulderRoll", "LElbowYaw", "LElbowRoll"]
    Arm1 = [-40,  25, 0, -40]
    Arm1 = [ x * motion.TO_RAD for x in Arm1]

    Arm2 = [-40,  50, 0, -80]
    Arm2 = [ x * motion.TO_RAD for x in Arm2]

    pFractionMaxSpeed = 0.6

    motion_service.angleInterpolationWithSpeed(JointNames, Arm1, pFractionMaxSpeed)
    motion_service.angleInterpolationWithSpeed(JointNames, Arm2, pFractionMaxSpeed)
    motion_service.angleInterpolationWithSpeed(JointNames, Arm1, pFractionMaxSpeed)


def main(session):
    """
    Walk - Small example to make Nao walk
    This example is only compatible with NAO
    """
    # Get the services ALMotion & ALRobotPosture.

    motion_service = session.service("ALMotion")
    posture_service = session.service("ALRobotPosture")

    # Wake up robot
    motion_service.wakeUp()

    # Send robot to Stand
    posture_service.goToPosture("StandInit", 0.5)

    #####################
    ## Enable arms control by Motion algorithm
    #####################
    motion_service.setMoveArmsEnabled(True, True)
    # motion_service.setMoveArmsEnabled(False, False)

    #####################
    ## FOOT CONTACT PROTECTION
    #####################
    #motion_service.setMotionConfig([["ENABLE_FOOT_CONTACT_PROTECTION", False]])
    motion_service.setMotionConfig([["ENABLE_FOOT_CONTACT_PROTECTION", True]])

    #TARGET VELOCITY
    X = -0.5  # backward
    Y = 0.0
    Theta = 0.0
    Frequency =0.0 # low speed
    try:
        motion_service.moveToward(X, Y, Theta, [["Frequency", Frequency]])
    except Exception, errorMsg:
        print str(errorMsg)
        print "This example is not allowed on this robot."
        exit()

    userArmsCartesian(motion_service)

    #TARGET VELOCITY
    X = 0.8
    Y = 0.0
    Theta = 0.0
    Frequency =1.0 # max speed
    try:
        motion_service.moveToward(X, Y, Theta, [["Frequency", Frequency]])
    except Exception, errorMsg:
        print str(errorMsg)
        print "This example is not allowed on this robot."
        exit()

    time.sleep(4.0)

    #TARGET VELOCITY
    X = 0.2
    Y = -0.5
    Theta = 0.2
    Frequency = 1.0

    try:
        motion_service.moveToward(X, Y, Theta, [["Frequency", Frequency]])
    except Exception, errorMsg:
        print str(errorMsg)
        print "This example is not allowed on this robot."
        exit()

    time.sleep(2.0)
    userArmArticular(motion_service)
    time.sleep(2.0)

    #####################
    ## End Walk
    #####################
    #TARGET VELOCITY
    X = 0.0
    Y = 0.0
    Theta = 0.0
    motion_service.moveToward(X, Y, Theta)

    motion_service.waitUntilMoveIsFinished()

    # Go to rest position
    motion_service.rest()


if __name__ == "__main__":
    parser = argparse.ArgumentParser()
    parser.add_argument("--ip", type=str, default="127.0.0.1",
                        help="Robot IP address. On robot or Local Naoqi: use '127.0.0.1'.")
    parser.add_argument("--port", type=int, default=9559,
                        help="Naoqi port number")

    args = parser.parse_args()
    session = qi.Session()
    try:
        session.connect("tcp://" + args.ip + ":" + str(args.port))
    except RuntimeError:
        print ("Can't connect to Naoqi at ip \"" + args.ip + "\" on port " + str(args.port) +".\n"
               "Please check your script arguments. Run with -h option for help.")
        sys.exit(1)
    main(session)

Move to

Make NAO walk to an objective.

almotion_moveTo.py

#! /usr/bin/env python
# -*- encoding: UTF-8 -*-

"""Example: Move To - Small example to make Nao Move To an Objective"""

import qi
import argparse
import sys
import math
import almath


def main(session):
    """
    Move To: Small example to make Nao Move To an Objective.
    """
    # Get the services ALMotion & ALRobotPosture.

    motion_service = session.service("ALMotion")
    posture_service = session.service("ALRobotPosture")

    # Wake up robot
    motion_service.wakeUp()

    # Send robot to Stand Init
    posture_service.goToPosture("StandInit", 0.5)

    #####################
    ## Enable arms control by move algorithm
    #####################
    motion_service.setMoveArmsEnabled(True, True)
    #~ motion_service.setMoveArmsEnabled(False, False)

    #####################
    ## FOOT CONTACT PROTECTION
    #####################
    #~ motion_service.setMotionConfig([["ENABLE_FOOT_CONTACT_PROTECTION",False]])
    motion_service.setMotionConfig([["ENABLE_FOOT_CONTACT_PROTECTION", True]])

    #####################
    ## get robot position before move
    #####################
    initRobotPosition = almath.Pose2D(motion_service.getRobotPosition(False))

    X = 0.3
    Y = 0.1
    Theta = math.pi/2.0
    motion_service.moveTo(X, Y, Theta, _async=True)
    # wait is useful because with _async moveTo is not blocking function
    motion_service.waitUntilMoveIsFinished()

    #####################
    ## get robot position after move
    #####################
    endRobotPosition = almath.Pose2D(motion_service.getRobotPosition(False))

    #####################
    ## compute and print the robot motion
    #####################
    robotMove = almath.pose2DInverse(initRobotPosition)*endRobotPosition
    # return an angle between ]-PI, PI]
    robotMove.theta = almath.modulo2PI(robotMove.theta)
    print "Robot Move:", robotMove

    # Go to rest position
    motion_service.rest()


if __name__ == "__main__":
    parser = argparse.ArgumentParser()
    parser.add_argument("--ip", type=str, default="127.0.0.1",
                        help="Robot IP address. On robot or Local Naoqi: use '127.0.0.1'.")
    parser.add_argument("--port", type=int, default=9559,
                        help="Naoqi port number")

    args = parser.parse_args()
    session = qi.Session()
    try:
        session.connect("tcp://" + args.ip + ":" + str(args.port))
    except RuntimeError:
        print ("Can't connect to Naoqi at ip \"" + args.ip + "\" on port " + str(args.port) +".\n"
               "Please check your script arguments. Run with -h option for help.")
        sys.exit(1)
    main(session)

Walk faster

Make NAO walk with greater step length.

almotion_moveFaster.py

#! /usr/bin/env python
# -*- encoding: UTF-8 -*-

"""Example: Walk - Small example to make Nao walk"""

import qi
import argparse
import sys
import time


def main(session):
    """
    Walk: Small example to make Nao walk Faster (Step of 6cm).
    This example is only compatible with NAO.
    """
    # Get the services ALMotion & ALRobotPosture.

    motion_service = session.service("ALMotion")
    posture_service = session.service("ALRobotPosture")

    # Wake up robot
    motion_service.wakeUp()

    # Send robot to Stand Init
    posture_service.goToPosture("StandInit", 0.5)

    # Initialize the walk process.
    # Check the robot pose and take a right posture.
    # This is blocking called.
    motion_service.moveInit()

    # TARGET VELOCITY
    X         = 1.0
    Y         = 0.0
    Theta     = 0.0
    Frequency = 1.0

    # Default walk (MaxStepX = 0.04 m)
    try:
        motion_service.moveToward(X, Y, Theta, [["Frequency", Frequency]])
    except Exception, errorMsg:
        print str(errorMsg)
        print "This example is not allowed on this robot."
        exit()

    time.sleep(3.0)
    print "walk Speed X :",motion_service.getRobotVelocity()[0]," m/s"

    # Speed walk  (MaxStepX = 0.06 m)
    # Could be faster: see walk documentation
    try:
        motion_service.moveToward(X, Y, Theta, [["Frequency", Frequency],
                                             ["MaxStepX", 0.06]])
    except Exception, errorMsg:
        print str(errorMsg)
        print "This example is not allowed on this robot."
        exit()

    time.sleep(4.0)
    print "walk Speed X :",motion_service.getRobotVelocity()[0]," m/s"

    # stop walk on the next double support
    motion_service.stopMove()

    # Go to rest position
    motion_service.rest()


if __name__ == "__main__":
    parser = argparse.ArgumentParser()
    parser.add_argument("--ip", type=str, default="127.0.0.1",
                        help="Robot IP address. On robot or Local Naoqi: use '127.0.0.1'.")
    parser.add_argument("--port", type=int, default=9559,
                        help="Naoqi port number")

    args = parser.parse_args()
    session = qi.Session()
    try:
        session.connect("tcp://" + args.ip + ":" + str(args.port))
    except RuntimeError:
        print ("Can't connect to Naoqi at ip \"" + args.ip + "\" on port " + str(args.port) +".\n"
               "Please check your script arguments. Run with -h option for help.")
        sys.exit(1)
    main(session)

Customized walk

Walk customization

Make NAO do a custom walk: NAO is limping and then walking correctly, just like Keyser Sose in The Usual Suspects.

almotion_moveCustomization.py

#! /usr/bin/env python
# -*- encoding: UTF-8 -*-

"""Example: Walk - Small example to make Nao walk"""

import qi
import argparse
import sys
import time
import almath


def main(session):
    """
    Walk: Small example to make Nao walk with gait customization.
    NAO is Keyser Soze.
    This example is only compatible with NAO.
    """
    # Get the services ALMotion & ALRobotPosture.

    motion_service = session.service("ALMotion")
    posture_service = session.service("ALRobotPosture")

    # Wake up robot
    motion_service.wakeUp()

    # Send robot to Stand Init
    posture_service.goToPosture("StandInit", 0.5)

    # TARGET VELOCITY
    X         = 1.0
    Y         = 0.0
    Theta     = 0.0
    Frequency = 1.0

    # Defined a limp walk
    try:
        motion_service.moveToward(X, Y, Theta,[["Frequency", Frequency],
                                            # LEFT FOOT
                                            ["LeftStepHeight", 0.02],
                                            ["LeftTorsoWy", 5.0*almath.TO_RAD],
                                            # RIGHT FOOT
                                            ["RightStepHeight", 0.005],
                                            ["RightMaxStepX", 0.001],
                                            ["RightMaxStepFrequency", 0.0],
                                            ["RightTorsoWx", -7.0*almath.TO_RAD],
                                            ["RightTorsoWy", 5.0*almath.TO_RAD]] )
    except Exception, errorMsg:
        print str(errorMsg)
        print "This example is not allowed on this robot."
        exit()

    time.sleep(4.0)

    try:
        motion_service.moveToward(X, Y, Theta, [["Frequency", Frequency]])
    except Exception, errorMsg:
        print str(errorMsg)
        print "This example is not allowed on this robot."
        exit()

    time.sleep(4.0)

    # stop walk in the next double support
    motion_service.stopMove()

    # Go to rest position
    motion_service.rest()


if __name__ == "__main__":
    parser = argparse.ArgumentParser()
    parser.add_argument("--ip", type=str, default="127.0.0.1",
                        help="Robot IP address. On robot or Local Naoqi: use '127.0.0.1'.")
    parser.add_argument("--port", type=int, default=9559,
                        help="Naoqi port number")

    args = parser.parse_args()
    session = qi.Session()
    try:
        session.connect("tcp://" + args.ip + ":" + str(args.port))
    except RuntimeError:
        print ("Can't connect to Naoqi at ip \"" + args.ip + "\" on port " + str(args.port) +".\n"
               "Please check your script arguments. Run with -h option for help.")
        sys.exit(1)
    main(session)

Walk to customization

Make NAO walk to an objective with custom feet gait config.

almotion_moveToCustomization.py

#! /usr/bin/env python
# -*- encoding: UTF-8 -*-

"""Example: Move To - Small example to make Nao Move To an Objective"""

import qi
import argparse
import sys


def main(session):
    """
    Move To - Small example to make Nao Move To an Objective.
    This example is only compatible with NAO.
    """
    # Get the services ALMotion & ALRobotPosture.

    motion_service = session.service("ALMotion")
    posture_service = session.service("ALRobotPosture")

    # Wake up robot
    motion_service.wakeUp()

    # Send robot to Stand Init
    posture_service.goToPosture("StandInit", 0.5)

    x     = 0.2
    y     = 0.0
    theta = 0.0

    # This example show customization for the both foot
    # with all the possible gait parameters
    try:
        motion_service.moveTo(x, y, theta,
            [ ["MaxStepX", 0.02],         # step of 2 cm in front
              ["MaxStepY", 0.16],         # default value
              ["MaxStepTheta", 0.4],      # default value
              ["MaxStepFrequency", 0.0],  # low frequency
              ["StepHeight", 0.01],       # step height of 1 cm
              ["TorsoWx", 0.0],           # default value
              ["TorsoWy", 0.1] ])         # torso bend 0.1 rad in front
    except Exception, errorMsg:
        print str(errorMsg)
        print "This example is not allowed on this robot."
        exit()

    # This example show customization for the both foot
    # with just one gait parameter, in this case, the other
    # parameters are set to the default value
    try:
        motion_service.moveTo(x, y, theta, [ ["StepHeight", 0.04] ]) # step height of 4 cm
    except Exception, errorMsg:
        print str(errorMsg)
        print "This example is not allowed on this robot."
        exit()

    # Go to rest position
    motion_service.rest()


if __name__ == "__main__":
    parser = argparse.ArgumentParser()
    parser.add_argument("--ip", type=str, default="127.0.0.1",
                        help="Robot IP address. On robot or Local Naoqi: use '127.0.0.1'.")
    parser.add_argument("--port", type=int, default=9559,
                        help="Naoqi port number")

    args = parser.parse_args()
    session = qi.Session()
    try:
        session.connect("tcp://" + args.ip + ":" + str(args.port))
    except RuntimeError:
        print ("Can't connect to Naoqi at ip \"" + args.ip + "\" on port " + str(args.port) +".\n"
               "Please check your script arguments. Run with -h option for help.")
        sys.exit(1)
    main(session)

Dubins curve

Make NAO walk along a dubins curve.

almotion_moveToDubinsCurve.py

#! /usr/bin/env python
# -*- encoding: UTF-8 -*-

"""Example: Walk To - Small example to make Nao Walk follow a Dubin Curve"""

import qi
import argparse
import sys
import almath


def main(session):
    """
    Walk To: Small example to make Nao Walk follow a Dubins Curve.
    """
    # Get the services ALMotion & ALRobotPosture.

    motion_service = session.service("ALMotion")
    posture_service = session.service("ALRobotPosture")

    # Wake up robot
    motion_service.wakeUp()

    # Send robot to Stand Init
    posture_service.goToPosture("StandInit", 0.5)

    # first we defined the goal
    goal = almath.Pose2D(0.0, -0.4, 0.0)

    # We get the dubins solution (control points) by
    # calling an almath function

    circleRadius = 0.04
    # Warning : the circle use by dubins curve
    #           have to be 4*CircleRadius < norm(goal)
    dubinsSolutionAbsolute = almath.getDubinsSolutions(goal, circleRadius)

    # moveTo With control Points use relative commands but
    # getDubinsSolution return absolute position
    # So, we compute dubinsSolution in relative way
    dubinsSolutionRelative = []
    dubinsSolutionRelative.append(dubinsSolutionAbsolute[0])
    for i in range(len(dubinsSolutionAbsolute)-1):
        dubinsSolutionRelative.append(
                dubinsSolutionAbsolute[i].inverse() *
                dubinsSolutionAbsolute[i+1])

    # create a vector of moveTo with dubins Control Points
    moveToTargets = []
    for i in range(len(dubinsSolutionRelative)):
        moveToTargets.append(
            [dubinsSolutionRelative[i].x,
             dubinsSolutionRelative[i].y,
             dubinsSolutionRelative[i].theta] )

    # Initialized the Move process and be sure the robot is ready to move
    # without this call, the first getRobotPosition() will not refer to the position
    # of the robot before the move process
    motion_service.moveInit()

    # get robot position before move
    robotPositionBeforeCommand  = almath.Pose2D(motion_service.getRobotPosition(False))

    motion_service.moveTo( moveToTargets )

    # With MoveTo control Points, it's also possible to customize the gait parameters
    # motionProxy.moveTo(moveToTargets,
    #                    [["StepHeight", 0.001],
    #                     ["MaxStepX", 0.06],
    #                     ["MaxStepFrequency", 1.0]])

    # get robot position after move
    robotPositionAfterCommand = almath.Pose2D(motion_service.getRobotPosition(False))

    # compute and print the robot motion
    robotMoveCommand = almath.pose2DInverse(robotPositionBeforeCommand)*robotPositionAfterCommand
    print "The Robot Move Command: ", robotMoveCommand

    # Go to rest position
    motion_service.rest()


if __name__ == "__main__":
    parser = argparse.ArgumentParser()
    parser.add_argument("--ip", type=str, default="127.0.0.1",
                        help="Robot IP address. On robot or Local Naoqi: use '127.0.0.1'.")
    parser.add_argument("--port", type=int, default=9559,
                        help="Naoqi port number")

    args = parser.parse_args()
    session = qi.Session()
    try:
        session.connect("tcp://" + args.ip + ":" + str(args.port))
    except RuntimeError:
        print ("Can't connect to Naoqi at ip \"" + args.ip + "\" on port " + str(args.port) +".\n"
               "Please check your script arguments. Run with -h option for help.")
        sys.exit(1)
    main(session)

Move head while walking

almotion_moveWithJerkyHead.py

#! /usr/bin/env python
# -*- encoding: UTF-8 -*-

"""Example: Walk - Small example to make Nao walk"""

import qi
import argparse
import sys
import time
import random


def main(session):
    """
    Walk: Small example to make Nao walk with jerky head.
    This example is only compatible with NAO.
    """
    # Get the services ALMotion & ALRobotPosture.

    motion_service = session.service("ALMotion")
    posture_service = session.service("ALRobotPosture")

    # Wake up robot
    motion_service.wakeUp()

    # Send robot to Stand Init
    posture_service.goToPosture("StandInit", 0.5)

    # Initialize the move process.
    # Check the robot pose and take a right posture.
    # This is blocking called.
    motion_service.moveInit()

    testTime = 10.0 # seconds
    t  = 0.0
    dt = 0.2

    while t<testTime:
        # WALK
        X         = random.uniform(0.4, 1.0)
        Y         = random.uniform(-0.4, 0.4)
        Theta     = random.uniform(-0.4, 0.4)
        Frequency = random.uniform(0.5, 1.0)
        try:
            motion_service.moveToward(X, Y, Theta, [["Frequency", Frequency]])
        except Exception, errorMsg:
            print str(errorMsg)
            print "This example is not allowed on this robot."
            exit()

        # JERKY HEAD
        motion_service.setAngles("HeadYaw", random.uniform(-1.0, 1.0), 0.6)
        motion_service.setAngles("HeadPitch", random.uniform(-0.5, 0.5), 0.6)

        t = t + dt
        time.sleep(dt)

    # stop move on the next double support
    motion_service.stopMove()

    # Go to rest position
    motion_service.rest()


if __name__ == "__main__":
    parser = argparse.ArgumentParser()
    parser.add_argument("--ip", type=str, default="127.0.0.1",
                        help="Robot IP address. On robot or Local Naoqi: use '127.0.0.1'.")
    parser.add_argument("--port", type=int, default=9559,
                        help="Naoqi port number")

    args = parser.parse_args()
    session = qi.Session()
    try:
        session.connect("tcp://" + args.ip + ":" + str(args.port))
    except RuntimeError:
        print ("Can't connect to Naoqi at ip \"" + args.ip + "\" on port " + str(args.port) +".\n"
               "Please check your script arguments. Run with -h option for help.")
        sys.exit(1)
    main(session)