ALPhotoCapture¶
NAOqi Vision - Overview | API | Tutorial
What it does¶
The ALPhotoCapture module allows you to take pictures and using the robot cameras and save them on disk.
TakePicture¶
This function takes and stores one picture using the module’s parameters (color space, frame rate, resolution, picture format). All these parameters can be set using the appropriate methods (see the API section). The location of the file on the disk is given as argument.
Note
A button is available in the Monitor GUI for taking pictures by calling this function.
TakePictures¶
This function is similar to ALPhotoCaptureProxy::takePicture but allows to take several
pictures. The final file names are constructed by appending the number of the
picture to the file name.
Note
If you don’t manually set the parameters, the following ones will be used by default:
- Camera ID: default (top camera)
- Color space: BGR
- Time between two pictures: 200 millisecond (i.e. 5 frames per second)
- Resolution: VGA (640 x 480)
- Picture format: jpg
Performances and Limitations¶
A call to ALPhotoCaptureProxy::takePicture or ALPhotoCaptureProxy::takePictures
takes some time because the module has to subscribe to ALVideoDevice and wait a few hundred milliseconds
for the camera image to stabilize. However, if you need reactivity it is possible to subscribe to
ALVideoDevice before taking the picture(s), thus saving up to a second or more. This is done by
calling the method ALPhotoCaptureProxy::halfPress. A second call will cause the module
to unsubscribe from ALVideoDevice.
Note
Please note that no change in camera ID, color space, time period, resolution will be taken into account when the halfPress mode is on. You have to turn it off and on again for the new settings to be applied.
Warning
Be careful when turning this mode on especially if the requested resolution is high, for it might affect performance of all other modules which get data from ALVideoDevice. It is advised to turn the halfPress mode off as soon as it is not needed anymore.
