SoftBank Robotics documentation What's new in NAOqi 2.5?

Event and state notifications

You may receive notifications from NAO system or from an application.

In that case, a small sound is played and the status LEDs remain still white but blink once in a while with a colour indicating the severity of the notification.

Status LEDs is ... Severity

white_chest

Steady White light,

cut by a brief

blinking in ...

green_chest Green NAO gives you some feed-back by an Info notification about an ongoing action.
yellow_chest Yellow

Warning notification occurs when an issue requires your attention and/or action.

NAO is still usable but, it may either run in a degraded mode in which some features may be not available or it may soon become unusable if you don’t solve the problem.

red_chest Red

Error notification occurs when one or all functionality(ies) of NAO become unusable.

Try to solve the problem using the tips. If the problem persists, contact the customer support and provide them with the error ID. For further details, see: Contacting customer support for NAO.

Error and Warning notification messages are prefixed by their severity and their ID when they are said, so that you can give them to the customer support to describe more easily your problem.

Download a printable version: Status LEDs - Cheat sheet.

To ask NAO to read the notification, see: Requesting technical information.

List of notifications

Boot process

# Message Tips Severity
10 I canceled my system update. The system image was invalid. I am still running version <x.y.z>. The file containing the system image seems unusable, try again to retrieve the relevant system file. red_chest
11
100

I successfully updated my system.

I am now running version <x.y.z>.

  green_chest
101

I canceled my system update. The system image was not compatible with my upgrade program.

I am still running version <x.y.z>.

The system image used for the update is not compatible with your robot hardware. Check what system image version supports your robot version and model, and retry with one of the supported system image version. red_chest
102 I canceled my system update. The system image was not compatible with my processor. I am still running version <x.y.z>.
103 I canceled my system update. The system image was not compatible with my body. I am still running version <x.y.z>.
104 I canceled my system update. The system image was corrupted. I am still running version <x.y.z>. The system image is corrupted. Try downloading it again then restart the update process. red_chest
105

I canceled my system update.

My current system seems corrupted. I am still running version <x.y.z>.

The update program cannot recognize your robot hardware. Some changes done on the hardware damage it. Contact the support. red_chest
110 I could not update my system. Try to update me again.   red_chest
111
120

I successfully completed my factory reset.

All my data and settings have been reset.

  green_chest
200

I couldn’t complete my factory reset.

I may still have some data or settings from before.

Retry a factory reset to remove all my data and settings.

Retry the update with factory reset enabled.

If the problem persists, contact the support.

red_chest
201
202
203 I successfully completed my factory reset. All my data and settings have been reset.   green_chest
204

I can’t access some of my data.

My user partition seems corrupted. Please try to reboot me to fix the problem.

The memory space dedicated to the user is not accessible due to some hardware failure.

Try to reboot the robot.

If the problem persists, contact the support.

yellow_chest
205
214

I can’t access some of my data.

My internal partition seems corrupted. Please try to reboot me to fix the problem.

The memory space dedicated to internal usage is not accessible due to some hardware failure.

Try to reboot the robot.

If the problem persists, contact the support.

yellow_chest
215
400 I can’t move. My current system is not compatible with my body. Retry to update me with a compatible system image. The current system image of your robot is not compatible with your robot hardware. Check what system image version supports your robot version and model, and retry with one of the supported system image version. red_chest
401 I can’t move. My current system is way too old for my body. Retry to update me with a more recent system image.
402 I can’t move. My current system is way too recent for my old body. Retry to update me with a less recent system image.
404 I can’t move. I can’t access my body. Please try to reboot me to fix the problem.

The head does not find or recognize its body. The robot is unusable.

Try to reboot to fix this.

red_chest
405

I updated some of my firmwares.

Please reboot me to finish the update.

Some new firmwares have been installed but will not be enabled until a reboot of the robot.

Turn off the robot using the standard procedure, then start it again.

If this warning occurs on every boot, it means:

  • either some hardware is too old and cannot be updated;
  • or some hardware is broken and cannot be updated.

In either case, you should contact the support.

yellow_chest
500 I can’t connect to the cloud services. My head identifier is missing. Please contact support. Contact the support. red_chest
501 I can’t connect to the cloud services. My system date is wrong. Please ensure that I am connected to the Internet and reboot me to fix the problem. Make sure your robot is connected to the Internet then restart it to update the date. yellow_chest
600 I’m not safe like this. Please help me sit or crouch. The robot is not in a good position to start autonomous life. Put it in sitting or crouching position and it will start life. red_chest

Diagnosis - NAO

# Message Tips Severity
710 I can’t move anymore. I detected an error on <X> of my vital devices: <list of devices>. Please try to reboot me to fix the problem.

This will have an impact on your robot,

see Diagnosis effect.

If the problem persists after a reboot, contact the support.

red_chest
711 I detected an error on <X> of my devices: <list of devices>. Please try to reboot me to fix the problem. yellow_chest
712 I detected a system error: one of my software does not run properly. Please try to reboot me to fix the problem.

If the problem persists after a reboot,

contact the support.

red_chest
713 I can’t move anymore. I detected an error on <X> of my vital devices: <list of devices>. Please try to reboot me to fix the problem.

This will have an impact on your robot, see Diagnosis effect.

If the problem persists after a reboot, contact the support.

red_chest
714 I detected an error on <X> of my devices: <list of devices>. Please try to reboot me to fix the problem. yellow_chest
720 Some of my motors are getting hot in my <chainName wheel or sensor>. I will need to rest soon. Robot motors are getting hot or are already too hot to be able to move. Put the robot in crouch and unstiffened and wait for few tens of minutes to let its motors cool down before you can use it again. yellow_chest
721

A part of my body cannot move anymore. Some of my motors are too hot in my <limbName>.

Please let me rest for a while.

722 I can’t move anymore. Some of my motors are too hot in my <limbName>. Please let me rest for a while. red_chest
723 Some of my motors are getting hot in my <chainName wheel or sensor>. I will need to rest soon. yellow_chest
724 Some of my motors are too hot in my <limbName>. Please let me rest for a while.
725 My memory seems full. Please reboot me to fix the problem. Robot RAM is full. Reboot the robot. yellow_chest
726 My memory seems full. Please remove some applications or data to make some room. Robot user partition is full. Remove some applications or some data. yellow_chest
730 My head processor is getting hot. I will need to rest soon. Robot head processor is getting or is already too hot. Shut down the robot for few tens of minutes. yellow_chest
731 My head processor is too hot. Please let me rest for a while. red_chest

Battery - notifications

# Message Tips Severity
800 I can’t access my battery. Please try to reboot me to fix the problem. If the problem persists after a reboot, contact the support. red_chest
801 My battery will soon need charging. The battery level reached 30%. See: Charging the battery. yellow_chest
802 My battery needs urgent charging. The battery level reached 15%. See: Charging the battery. yellow_chest
803 My battery is totally empty. I’m shutting down. The robot ran out of battery so it shut down. See: Charging the battery. red_chest
805 My battery is now fully charged.   green_chest
806 I detected an unusual temperature on my battery. I’m shutting down. Please let me rest for at least 2 hours before rebooting me. If the problem persists after 2 hours with the robot off, contact the support. red_chest
810 I failed to leave my charging station. Please help me to move away from it.   red_chest

Apps 2.1 Store - notifications

# Message Tips Severity
830 I have installed <Name of the applications>.   green_chest
832 I have updated <Name of the applications>.   green_chest
834 I have removed the application <Name of the applications>.   green_chest
840 I have downloaded system version <x.y.z>. Reboot me to install it.   yellow_chest

Robot backup tool - notifications

# Message Tips Severity
900 I successfully backed up my data.   green_chest
901 I couldn’t back up my data. My system version is not compatible with this operation. Please try to update me with a more recent version and try again.   red_chest
902 I couldn’t back up my data. The files were not readable. Please try again.   red_chest
903 I couldn’t back up my data. Connection with back up application was interrupted. Please ensure that I am connected to the network and try again.   red_chest
920 I successfully restored my data.   green_chest
921 I couldn’t restore my data. My system version is not compatible with this operation. Please try to update me with a more recent version and try again.   red_chest
922 I couldn’t restore my data. The files were not writable. Please try again.   red_chest
923 I couldn’t restore my data. Connection with back up application was interrupted. Please ensure that I am connected to the network and try again.   red_chest