Event and state notifications¶
You may receive notifications from NAO system or from an application.
In that case, a small sound is played and the status LEDs remain still white but blink once in a while with a colour indicating the severity of the notification.
| Status LEDs is ... | Description | |
|---|---|---|
Steady White light, cut by a brief blinking in ... |
 Green |
NAO gives you some feed-back by an Info notification about an ongoing action. |
 Yellow |
Warning notification occurs when an issue requires your attention and/or action. NAO is still usable but, it may either run in a degraded mode in which some features may be not available or it may soon become unusable if you don’t solve the problem. |
|
 Red |
Error notification occurs when one or all functionality(ies) of NAO become unusable. Try to solve the problem using the tips. If the problem persists, contact the customer support and provide them with the error ID. For further details, see: Contacting customer support for NAO. |
|
Download a printable version: Status LEDs - Cheat sheet.
To ask NAO to read the notification, see: Requesting technical information.
List of notifications¶
Boot process - notifications¶
| # | Message | Tips | Type |
|---|---|---|---|
| 10 | I canceled my system update. The system image was invalid. I am still running version <x.y.z>. | The file containing the system image seems unusable, try again to retrieve the relevant system file. | |
| 11 | I canceled my system update. The system image was invalid. I am still running version <x.y.z>. | ||
| 100 | I successfully updated my system. I am now running version <x.y.z>. |
|
|
| 101 | I canceled my system update. The system image was not compatible with my upgrade program. I am still running version <x.y.z>. |
The system image is not compatible with the head. Check what system image version supports your robot version and retry with one of the supported system image version. |
|
| 102 | I canceled my system update. The system image was not compatible with my processor. I am still running version <x.y.z>. | The system image is not compatible with the head hardware. Check your head version and retry with a compatible system image. |
|
| 103 | I canceled my system update. The system image was not compatible with my body. I am still running version <x.y.z>. | ||
| 104 | I canceled my system update. The system image was corrupted. I am still running version <x.y.z>. | The system image you try to update to is corrupted. Try downloading it again then restart the update process. | |
| 105 | I canceled my system update. My current system seems corrupted. I am still running version <x.y.z>. | The update program cannot recognize the hardware. Some changes done on the hardware damage it. Contact the support. | |
| 110 | I could not update my system. | |
|
| 111 | |||
| 120 | I successfully completed my factory reset. All my data and settings have been reset. |
|
|
| 200 | I couldn’t complete my factory reset. I may still have some data or settings from before. |
Retry the update with factory reset enabled. If the problem persists, contact the support. |
|
| 201 | |||
| 202 | |||
| 203 | I successfully completed my factory reset. All my data and settings have been reset. | |
|
| 204 | I can’t access some of my data. My user partition seems corrupted. |
The memory space dedicated to the user is not accessible due to some hardware failure. Try to reboot the robot. If the problem persists, contact the support. |
|
| 205 | |||
| 214 | I can’t access some of my data. My internal partition seems corrupted. |
The memory space for internal usage is not accessible due to some hardware failure. Try to reboot the robot. If the problem persists, contact the support. |
|
| 215 | |||
| 400 | I can’t move. My current system is not compatible with my body. | Body hardware incompatibilities. Check the kind of robot you have, and retry with a compatible system image. |
|
| 401 | I can’t move. My current system is way too old for my body. | Check the minimal version supporting the body hardware of the robot, and retry with a compatible system image. | |
| 402 | I can’t move. My current system is way too recent for my old body. | Check the latest version supporting the body hardware of the robot, and retry with a compatible system image. | |
| 403 | I could not update all my firmwares. | Something went wrong updating the firmware. Try to reboot to fix this. |
|
| 404 | Body not found. | The head does not find or recognize its body. The robot is unusable. Try to reboot to fix this. |
|
| 405 | I updated some of my firmware. Please reboot me to finish the update. |
Some new firmware has been installed but will not be enabled until a reboot of the robot. Turn off the robot using the standard procedure, then start it again. If this warning occurs on every boot, it means:
In either case, you should contact the support. |
|
Diagnosis - NAO - notifications¶
| # | Message | Tips | Type |
|---|---|---|---|
| 500 | I can’t connect to the cloud services. My head identifier is missing. Please contact support. | |
|
| 501 | I can’t connect to cloud services, My system date is wrong. | Make sure your is connected to internet then restart it to update the date | |
| 710 | I detected an error on <X> of my vital devices: <list of devices>. | |
|
| 711 | I detected an error on <X> of my devices: <list of devices>. | |
|
| 712 | I detected a system error: one of my software does not run properly. | |
|
| 720 | Some of my motors are getting hot in my <chainName wheel or sensor>. I will need to rest soon. | This warning will have an impact on your robot, see Diagnosis effect. Contact the Aldebaran Robotics support. |
|
| 721 | A part of my body cannot move anymore. Some of my motors are too hot in my <limbName>. Please let me rest for a while. |
This error will have an impact on your robot, see Diagnosis effect. Contact the Aldebaran Robotics support. |
|
| 722 | I can’t move anymore. Some of my motors are too hot in my <limbName>. Please let me rest for a while. | |
|
| 730 | My head processor is too hot. | |
|
| 731 | My head processor is too hot. Please let me rest for a while. | |
Battery - notifications¶
| # | Message | Tips | Type |
|---|---|---|---|
| 800 | I can’t access my battery. | |
|
| 801 | My battery will soon need charging. | The battery level reached 30%. See: Charging the battery. | |
| 802 | My battery needs urgent charging. | The battery level reached 15%. See: Charging the battery. | |
| 803 | My battery is totally empty. I’m shutting down. | The robot ran out of battery so it shut down. See: Charging the battery. | |
| 804 | My battery is now fully charged. | |
Apps 2.1 Store - notifications¶
| # | Message | Tips | Type |
|---|---|---|---|
| 830 | I have installed <Name of the applications>. | |
|
| 832 | I have updated <Name of the applications>. | |
|
| 834 | I have removed the application <Name of the applications>. | |
|
| 840 | I have downloaded system version <X.Y.Z>. Reboot me to install it. | |